Displaying 391-400 of 1191 results for

If you’re looking for new solutions to tooling and workholding challenges, IMTS was a great place to start. The bi-annual trade show, held this past September in Chicago, allowed shops to browse for the “latest and greatest” technologies.

Do you have what it takes to raise your milling productivity to the next level? In addition to the requisite know-how, you need cutters and machine tools that will allow you to employ milling techniques that exceed what’s normally possible. Aided by the right hardware, you may soon be performing feats like pushing your feed rates to new highs and cutting harder materials than ever before.

With the number of offline and in-process toolsetting options on the rise, developing a way to efficiently utilize this technology can be confusing. Which presetter should we buy? What about the software that’s so often part of these systems—do we really need it?

Drilling advancements have spurred the evolution of oil and gas operations from simplistic single-well pad fields to more complex multi-well pads. Today, many producers are using fracking and lateral drilling techniques to place 10 or more wells on one pad.

There is no real problem with threading a pipe. Most DIY types can do it in their workshop with hand tools, but when the pipe is 40′ long and ordered by the ton, you are in oil country. Pumping crude oil out of the ground requires drill pipe, casing, tool joints, tees, crosses, flanges, and couplings. All those items need to be machined. And that takes specialized workholding.

With larger turbine components, compared to automotive and aerospace, plus assembly challenges, new machining technologies are gaining popularity. The conventional milling and broaching techniques in turbine blade machining, with the high tooling costs and abrasive flow issues, are fast fading, as modern assembly methods continue to drive machining tolerances to new heights

I just returned from IMTS in Chicago and my first thought was, “where will I be able to rack up all those bonus steps I got last week?” On the easiest day, I walked 7.9 miles, and I topped 10 miles on two other days. It’s easy to understand why.

One of the great benefits of solid round cutting tools is the ability to resharpen them after heavy use. Done right it’s like having a cat with nine lives: Dull…then like new. Dull again…and like new again. And since the cost to recondition solid tools is generally lower than the cost to replace them, there’s an economic benefit. The question then becomes what’s the best way to achieve the greatest possible benefit?

In a perfect CNC world, the first part is always a good one. There’s no need for extra blanks or barstock. Setup times are only as long as is needed to swap out a few tools and load a new program. There’s never a crash, never the need to reprogram an inefficient bit of code. The operator just pushes the green button and out pops a finished workpiece minutes or hours later.

For today’s industrial cutting tool manufacturers there is a continuous and increasing demand for faster cycle times, better asset utilization, tighter tolerances and improved quality. Running a successful manufacturing facility takes more than acquiring the latest state- of-the-art equipment and the most advanced grinding technology.